How do I program my DSC alarm?

Used when you are staying in the home. This feature allows you to arm your perimeter door and window sensors and leaves your motion sensors disarmed. To activate, press and hold the “stay” button, until you hear the keypad beep. “Away” Mode Used for system “Quick-Arm” or “One-Button Arming”.

Used when you are staying in the home. This feature allows you to arm your perimeter door and window sensors and leaves your motion sensors disarmed. To activate, press and hold the “stay” button, until you hear the keypad beep. “Away” Mode Used for system “Quick-Arm” or “One-Button Arming”.

how do I reset my DSC alarm system? How to Reset a DSC Alarm After the Power Has Been Off

  1. Open the access door on the unit.
  2. Press and hold the “RESET” key for 2 seconds.
  3. Press the buttons “*72” if the alarm does not reset after pressing the RESET button.
  4. Check the sensors if it still does not turn off.

In this way, how do I know what zones My DSC alarm?

To check which zones are open, simply press one of the arrow buttons on the keypad. This will scroll through all open zones.

What is the installer code for DSC?

The default installer code for a DSC is 5555. The installer code is the code that is used to get into the DSC programming mode so you can set the system up and make changes to panel programming. Having the installer code is the most important part of setting up the system.

How do you clear the memory on a DSC alarm system?

To clear the memory, arm and disarm the system. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm. To reset detectors, press and hold the RESET key () for 2 seconds. If a sensor fails to reset, it may still be detecting an alarm condition.

What does the yellow triangle mean on DSC alarm?

A yellow triangle on your DSC ADT Alarm system is also known as a “trouble light.” That means if you see this symbol, your system has an issue that you need to resolve. A trouble light could mean 1 of 8 problems. To find out what the problem is, you can simply press *2 on your keypad.

Why is my DSC alarm beeping?

Battery Trouble If your DSC home alarm is beeping due to this condition, the main panel battery is low or failing. If you’ve recently had a power outage, wait 24-48 hours after power is restored. The battery can be replaced by your alarm company, if you have one.

What is a DSC security system?

Your DSC Security System is made up of a DSC control panel, one or more keypads and various sensors and detectors. The control panel, which is a metal cabinet, will be mounted out of the way in a utility closet or in the basement. The metal cabinet contains the system electronics, fuses and back up battery.

How do I reset my DSC alarm installer code?

How do I change the DSC 1616, 1832, and 1864 installer code? Enter programming with *8-installer code (default is 5555). Go to section 006 to change the installer code. Enter a unique 4 digit code. The system should beep 3 times and exit back out. Press # to exit programming mode.

How do I reset my alarm without the code?

How to reset the installer code Unplug the transformer from the power source. Disconnect the battery. Plug the transformer back in. Reconnect the battery. Within 30 seconds of turning the alarm system on, press * and # at the same time. Enter *20. Enter a new 4 digit installer code. Press *99 to exit programming mode.

How do I change my DSC Code 1616?

How do I change the DSC 1616, 1832, and 1864 master code? Enter *8-installer code. Enter 007 to change the master code. Enter a unique 4 digit code. The system should beep 3 times and exit back out. Press # to exit programming mode.

How do you change the time on a DSC alarm system?

How To Change the Time and Date on the DSC Power Series Neo Keypad Press the * button, followed by 6. Enter your system’s master code. Press 1 to Select Time and Date programming. If you have a Full Message LCD Keypad, use the < or > keys to scroll to the menu options and press *.

How do I reset my ADT alarm code?

To change the user codes in the ADT system with keypad controls, press the star key and then the number 5 to indicate you want to reprogram a number. Enter your four- or six-digit master code number. Select the user access code you want to change, identified by entering 01 through 32.