How do I start an old gas fireplace?

The pilot knob has three positions: on, off and pilot. Move the pilot knob to the pilot position. This will allow you to push the knob in, which manually releases the flow of gas to the pilot. Now, while holding the pilot knob in, push the igniter button in once every second until the pilot is lit.

The next very important step in how to light a gas fireplace is to light the pilot light. You can do this by turning the knob to the Pilot position. Press and continue to press down on the control knob while UD press the ignition switch one time per second.

One may also ask, should the pilot light always be on in a gas fireplace? Electronic ignition is when the pilot light on a gas fireplace/insert/stove is only running when the fireplace is on, this means that the unit is likely to have a battery backup as well. A standing pilot is always on, always using a small amount of gas to run constantly unless the gas is physically turned off.

Also to know, how do you turn on a gas fireplace without the key?

When learning how to turn on a gas fireplace without a key, confirm that the unit has a control panel with an igniter switch. Remove any fireplace decoration that’s in the way. Control panels can usually be found at or around the base of the fireplace, concealed by a decorative screen that should be moved.

How do you turn on gas logs?

You turn the control knob to the pilot position, push the knob in, light the pilot with a match, then hold the knob down for 30 seconds or so until the pilot stays lit by itself. Once the pilot light will stay lit on its own, you can then move the knob to the “On” position.

Why is my gas fireplace not turning on?

1. Pilot light systems are the most common reason gas fireplaces fail to light, so check the main gas valve to make sure the gas is turned on. If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Look for and clear out any debris between the igniter and thermocouple.

Are gas fireplaces safe?

Gas fireplaces are safe. But as with all gas appliances, they do produce carbon monoxide. If something goes wrong, carbon monoxide put the home’s occupants at risk. Therefore, carbon monoxide detectors are a critical part of gas fireplace safety, even if you don’t use the fireplace often.

What happens if the pilot light goes out on a gas fireplace?

When a pilot light goes out on a gas fireplace, there is cause for concern if the gas flow hasn’t been interrupted. More commonly, a pilot light will go off because of a failure in the supply of gas. One thing to check is the gas valve on the fireplace and make sure it’s open.

How do you start a fireplace pilot light?

Hold the gas control button down while you hold the end of a lighted match or lighter at the end of the pilot tube. If you do this correctly, the pilot light should start as soon as the flame is close enough. Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it.

How do I know if my gas fireplace is working?

You should: Inspect the glass doors for cracks or latch issues. Check that gas logs are in the proper position. Turn gas off at the shut-off valve and test the igniter. Ignite the fire and look for clogged burner holes. If present, turn off gas and clear obstructions with a pin or needle.

Are gas fireplace keys universal?

A gas fireplace key replacement is an affordable option with Fireplace Doors Online! Each key in our collection will fit 1/4 or 5/16 inch valve stems. These universal gas valve keys are also designed to connect with both round (ball) and square (globe) valves and are crafted from zinc die-cast alloy.

How do you adjust the pilot light on a gas fireplace?

On some fireplaces, there will be a “Lo-Hi” button that allows you to adjust the flame upward or downward. On others, there will be a screw that you can easily adjust with a screwdriver. Turning the screw clockwise will lower the flame, while a counterclockwise motion will turn it up.

How do you start a gas fireplace with a key to the wall?

How to Use a Gas Fireplace With a Key Look around the base of the fireplace and locate a small metal hole; this is the keyhole. Grasp the handle of the key, which looks like a long metal pole. Turn the key counterclockwise approximately 1/2 turn to release the flow of gas into the fireplace logs.

Where is the pilot light in a gas fireplace?

Locate the gas control knob. Just above it, you should see a red or black push button, which means that the unit has a piezoelectric spark mechanism. Press the button once or twice to verify that there is a spark at the end of the pilot tube. If you don’t see a button, you must light the flame manually.

How do you turn off the pilot light on a gas fireplace?

Turn the gas control valve to the Off position. The gas supply to the pilot light will be cut off and the flame will go out. To avoid accidentally turning off the pilot light when turning off the burner, there is generally a mechanical block to prevent turning the valve all the way to the Off position.

How do you arrange fake gas fireplace logs?

How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs. Turn on the gas and light the fire using either matches or the automatic igniter.