How far should a fan hang from the ceiling?

For safety reasons, a ceiling fan should always hang at least 7′ above the floor. Also, for maximum air flow there should be at least 10 inches of air space between the blades and the ceiling.

Ceiling fans should be installed, or mounted, in the middle of the room and at least 7 feet above the floor and 18 inches from the walls. If ceiling height allows, install the fan 8 – 9 feet above the floor for optimal airflow.

Additionally, how do I choose a downrod length? To get perfect year round use follow these simple three steps:

  1. Measure your total ceiling height.
  2. Subtract that from 8 feet, which is the lowest point a fan should typically hang down to from a high ceiling.
  3. Whatever number that is, purchase a downrod that is as close to half of that number in length as possible.

Accordingly, how long should a downrod be for vaulted ceilings?

Most ceiling fan manufacturers include a short downrod in the box, but to install a ceiling fan safely on a vaulted or cathedral ceiling you will need to have a total downrod length of at least 12 inches.

Are ceiling fan Downrods interchangeable?

Unfortunately, not all downrods are interchangeable with one another unless it is from the same manufacturer. If you need to replace your old downrod it is best to make sure that it is compatible with the ceiling fan.

Can a ceiling fan be too close to the ceiling?

Height from Ceiling Unless it is a hugger ceiling fan that is designed to be closer to the ceiling, if your typical fan is too close or too far from the ceiling it won’t move as much air. If you have vaulted ceilings you’ll want to add a longer downrod so the blades are about 8 to 9 feet from the floor.

Can you put a ceiling fan on an 8 foot ceiling?

There are no lights hanging down below the fan to elongate the fan and extend the length that the fans comes down from the ceiling. In order for a fan to be considered to be OK to use on an 8 foot ceiling, the bottom of the blades of the fan must be 7 feet off the floor when the fan is installed.

Does ceiling fan have to be centered in Room?

Although many people place a ceiling fan in the center of a room, the most efficient location is in the areas where people gather. For a very small living room, centering a ceiling fan can work best, but for larger rooms, place them directly over the seating area.

How do you determine the size of a ceiling fan for a room?

Measure the room’s length and width, then multiply them together. If the room is 75 square feet or smaller, your ceiling fan should be 36 inches or less in diameter. For rooms between 75 and 144 square feet, choose a ceiling fan with a diameter of 36 to 42 inches.

Are hugger ceiling fans good?

The Best Huggers are Actually Ceiling Fans: Flush-Mount & Low-Profile. Hugger ceiling fans are defined as ceiling fans which include no downrod and are mounted flush to the ceiling. This is why they are often interchangeably referred to as flush-mount ceiling fans and are a great choice for low ceilings or small rooms.

Will a flush mount ceiling fan work on a slanted ceiling?

Flush mount fans work best on a flat ceiling Flush mount ceiling fans are meant to be used on flat ceilings. Since flush mount fans are anchored directly to the ceiling, they require an adapter and downrod to fit vaulted or sloped ceilings.

How do you measure the angle of a vaulted ceiling?

Use the measuring tape to measure from the point where the sloped ceiling meets the side wall, to the floor. Note the measurement. Subtract the lower height from the total ceiling height to determine the rise of the sloped ceiling. Note the measurement.

Can you put a ceiling fan on a vaulted ceiling?

Many residents want to install a ceiling fan in a vaulted ceiling to keep the room’s air circulating, but most vaulted designs do not allow for attic access. Residents can add the necessary fan by using a previously installed light fixture electrical connection and a long down-rod to clear the ceiling’s angled sides.

What is the lowest ceiling height for a ceiling fan?

Minimum Height Requirements But, national building codes require the fan blades of any ceiling fan to be at least 7 feet (or 84 inches) from the floor. As a result, you cannot install any ceiling fan in a room where the ceiling is lower than 7 1/2 feet.

When should a ceiling fan be flush mounted?

Flush Mount: Made for rooms with low ceilings where a low profile is wanted or required. These ceiling fans are mounted flush to the ceiling, with no extra attachment. Downrod Mount: Made for rooms with high ceilings, typically 8 feet or higher. Many ceiling fans include a downrod.

How do I find the angle of my ceiling?

Substitute the ceiling length and the difference in height into the equation: Tangent of the angle of slope = (difference in height / length of ceiling). For example, with a length of 20 feet and a difference in height of 1 foot, the tangent of the angle of slope is 0.05 (1/20 = 0.05).