What is the best thing to fill nail holes in trim?

Use Water-Based Wood Filler Not Wood Putty

For filling nail holes in painted wood trim, or smaller holes in plaster, drywall and even plastic trim, a high-quality, lightweight, non-shrinking spackling compound is perfect. You can also use 3M Patch Plus Primer that can be painted over almost immediately, so you can skip the primer step.

Subsequently, question is, what to use to fill gaps in baseboards? Baseboards. Seal narrow cracks with paintable or clear latex caulk, either at the top or along the bottom where the baseboards meet the floor. Run a continuous bead of caulk along the gap and smooth it with a caulk tool or wet finger. Wipe away the excess caulk with a damp cloth.

Then, can you use caulk to fill nail holes in trim?

Caulk is great for. On the other hand, caulk is terrible for filling nail holes and other holes in wood because over time it will shrink and cause a divot. And wood filler is a terrible choice for filling gaps in trim – it would take forever to apply and sand.

How do you fill nail holes in stained wood trim?

Filling nail holes in trim Press matching colored putty into nail holes on your project or trim with the tip of your finger after staining and varnishing. Then smooth it off and polish the area with a dry rag.

How do you install trim without a nail gun?

Hold the finishing tool in one hand, and line it up with your nail. With your other hand, hammer the end of the finishing tool to drive your nail into the trim- nick free. Using spackling compound or wood putty, smooth over the nails completely. Caulk along the top and bottom of the molding.

What is the difference between wood filler and wood putty?

Wood filler differs from wood putty in that the filler usually consists of sawdust or wood fibers suspended in a binder, while putty is usually a plastic such as epoxy, fiberglass or polyurethane. Moreover, unlike filler, putty doesn’t harden.

What can I use to cover nail holes?

Apply spackling paste to the holes with a putty knife. Spackling paste is the best material to use to fill nail holes in either plaster walls or drywall in a long-lasting way. It is also called joint compound or patching compound.

Can you use toothpaste to fill in nail holes?

Use Toothpaste to Fill Holes. Toothpaste is a great alternative to spackling if you have a hole in your wall smaller than 1/4 inch. Try to find a toothpaste close to the color of the wall, then squeeze the paste into the hole and wipe off the excess with a putty knife or playing card.

How do you fill nail holes in finished wood?

When you’re filling nail holes in unfinished wood, use a color-matched wood putty. Apply it to the wood with a putty knife, let it dry and then, sand it smooth. For finished wood, you can’t use cellulose putty because the necessary sanding would scratch the surface. Instead, use a color-matched wax pencil.

Can I use caulk instead of spackle?

Painters use caulk and spackling compound to fill gaps and holes, but that’s about all these two materials have in common. Whereas caulk is a flexible coating that resists moisture, spackling compound dries hard and isn’t water-resistant.

Can I use joint compound to fill nail holes?

To properly fill nail holes, you’ll want to use wall putty or drywall compound. Let the putty dry and follow the instructions from the putty. Drywall compound – With nail holes that have pulled some of the wall out, you’ll want to use drywall compound (also called joint compound or mud).