You can make straight cuts with a circular saw, a table saw or a chop saw. A blade with a tooth count of 100 or more is best, and to reduce chipping, its leading edge always should contact the face of the board. When cutting with a circular saw, this means turning the board over and cutting from the back.
Blades for Laminate Flooring In view of this, a thin kerf, 80 to 100 tooth, carbide-tipped blade is most effective for cutting laminates and will last for about 1000 sqft before needing to be re-sharpened.
Secondly, can you use a circular saw to cut laminate flooring? A Circular Saw: ?You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.
In this way, what is the best tool to cut laminate flooring?
Do I need a special blade to cut laminate?
You can make straight cuts with a circular saw, a table saw or a chop saw. A blade with a tooth count of 100 or more is best, and to reduce chipping, its leading edge always should contact the face of the board. When cutting with a table saw or chop saw, however, the board should be face-up.
Do you cut laminate flooring face up or down?
Cut out the curved shape. With a standard jigsaw blade, flip the laminate plank upside down. Place the pattern on the backside of the laminate, making sure to flip the pattern, so your cut laminate is positioned to come out correctly when the plank is flipped face up.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate. No matter what type of saw blade you use, you will likely wind up with residue on the saw blade.
What do you use to cut laminate?
You can use several tools to cut laminates, including a table saw or handheld power saw, a utility knife, a router or a hand slitter. The best cutting approach depends on whether you’re rough cutting or finishing edges.
How do you cut laminate lengthwise?
How to cut laminate flooring lengthwise Step 1: Place spacers along the walls. Step 2: Lay the laminate flooring board down, making sure the tongue is oriented towards the wall. Step 3: Use a straight edge or another laminate flooring board to guide the jigsaw / circular saw, while doing the cut.
How do you cut waterproof laminate flooring?
The First Row Score and cut the tongue off the first row of vinyl planks using a utility knife. Hold the next plank at a slight angle against the previous plank’s end and fold down to click it into place. To cut the last piece to fit, score with a utility knife and snap the plank.
How do you cut out a piece of laminate flooring?
How to Cut Laminate Floor That Is Already Installed Mark the laminate flooring along the desired cut line by using a chalk line. Set the cut depth on a circular saw to 1/32-inch deeper than the thickness of the laminate flooring layer. Put on a pair of safety glasses and align the circular saw blade with the chalk line on the flooring.
What tool do I use to cut laminate flooring?
Jigsaw: This is an essential tool for cutting laminate flooring and is used to make odd-shaped cuts to fit around poles, pipes and other obstacles. It can be used for cutting boards to width, and if you don’t buy a laminate floor cutter, the jigsaw works for cutting boards to length, too.
What kind of saw do you use to cut laminate flooring?
You can cut the planks using a table saw, miter saw, circular saw or hand saw. Typically, you will cut with the finished side up. Use duct tape to mark the plank more easily and reduce splintering.
How much is a laminate floor cutter?
Price: $29.99. Wonder cutter for laminate.
What is the best saw for laminate flooring?
The Predator Laminate Saw has a rigid blade which minimises vibration and ‘whip’ and is the ideal saw for use on laminate flooring, formica and beading.